HR High Efficiency Water-Water (Steam-Water) Heat Exchanger
I. Profile
ZH high efficiency heat exchanger is a kind of heat exchange equipment which uses the heat of waste gas and wastewater to heat cooling water. The heated water enters the equipment by one side of the tube box and passes through the heat exchange surface composed of high efficiency heat exchanger pipes. Four processes transfer heat to the heated water, so that the heated water reaches the required temperature. This series of heat exchangers are mainly used for waste heat recovery of industrial steam and waste water from chemical boilers in power plants, environmental protection service industries of petrochemical industry, light industry and other vapor-liquid-liquid heat transfer.
II. Technical characteristics
III. Main connecting tube table
S/N |
Model |
The heated water inlet A
|
The heated water outlet B
|
Heating water outlet D |
Heating water outlet D |
1 |
HR-10 |
PN1.0 DN80 |
PN1.0 DNSO |
PN1.0 DW65 |
PN1.0 DN65 |
2 |
HR-20 |
P1SI1.0 DN100 |
PN1.0 DN10O |
PN1.0 DN80 |
PN1.0 DN80 |
3 |
HR-35 |
PN1.Q DN150 |
PN1.0 DN150 |
PN1.0 DN100 |
PN1.0 DN100 |
4 |
HR-50 |
PN1.0 DN200 |
PN1.0 DN200 |
PN1.0 DM50 |
PM1.0 DN150 |
5 |
HR-80 |
PN1,0 DN250 |
PN1.0 DN2SO |
PN1.0 DN150 |
PN1.0 DN150 |
Note:The parameter in above tables are for reference only. The products can be customized and the relevant parameters should be provided.
IV. Equipment accessories
|
|
HR-10 |
HR-20 |
HR-35 |
HR-50 |
HR-80 |
Pressure gauge
|
Y-100, Ø100 |
P0.245 2.5grade |
P0.245 2.5grade |
P0.245 2.5grade |
P0.245 2.5grade |
P0.245 2.5grade |
|
Qty. |
1 |
i |
1 |
1 |
1 |
Pressure gauge |
Y-100. Ø100 |
P1.0 2.5grade |
P1.0 2.5grade |
P1.0 2.5grade |
P1.0 2.5grade |
P1.0 2.5grade |
|
Qty. |
1 |
1 |
1 |
1 |
1 |
Pressure gauge |
J11T-16 |
PN1.57 DN15 |
PM1.57 DN15 |
PN1.57 DN15 |
PN1.57 DN15 |
PN1,57 DN15 |
|
Qty. |
2 |
2 |
2 |
2 |
2 |
V. Overall size
Bottom View Diagram
1,HR-10 HR-20
2,HR-35 HR-50 HR-80
VI. Notices for order
A. It should be noted whether accessories are required in the contract when ordering equipment. if not, itis deemed as that only main body is provided without accessories.
B. The parameters listed in the table can only be used as reference. The design can bemodified according to the specific requirements of users.